Inglet

? Compare our cutter machines here! WHAT DO YOU NEED TO CUT?

WHAT DO YOU NEED TO CUT?

  Verdi BASIC Verdi TWIN Wincut Inblade Inblade PRO Inbest BASIC Inbest TWIN Inbest PRO
Download table
CUTTING SYSTEM SAW SAW BLADE INTERCHAN. HEADS INTERCHANGEABLE HEADS INTERCHANGEABLE HEADS
RIGIDS
PVC Foamboard 20 mm 20 mm 5 mm 5 mm 13 mm 5 mm / 10 mm** 10 mm
Dibond® 12 mm 12 mm - - 4 mm - - -
ChromaLuxe® 3 mm 3 mm - - 1 mm - - -
Plexiglas® 12 mm 12 mm - - 6 mm* / ♦  6 mm* / **/ ♦ 4 mm* / ♦ 4 mm* / ♦ 4 mm* / ♦
MDF / Wood 20 mm 20 mm - - 4 mm - - -
Glass - - 6 mm* / ♦ 6 mm ♦ 6 mm* / ♦ - - -
SEMI-RIGIDS
Foamboard - - 20 mm 20 mm 13 mm / 20 mm* 13 mm / 20 mm* 13 mm / 20 mm* 13 mm / 20 mm*
Cardboard - - 20 mm 20 mm 13 mm / 20 mm* 13 mm / 20 mm* 13 mm / 20 mm* 13 mm / 20 mm*
Re-board® - 20 mm 13 mm 13 mm / 20 mm* 13 mm / 20 mm* 13 mm / 20 mm* 13 mm / 20 mm*
Corrugated plastic 20 mm 20 mm 5 mm 5 mm 13 mm 13 mm 13 mm 13 mm
Passepartout - - Yes Yes Yes Yes Yes Yes
FLEXIBLES
Fabric / Textiles - - - Yes Yes Yes
Plastic film - - - Yes Yes Yes
Banner materials - - - Yes Yes Yes
Paper - - - Yes Yes Yes
Vinyl - - - Yes Yes Yes
Magnetic sheets - - - Yes Yes Yes
V-GROOVE
Dibond® - - 4 mm* - - -
Re-board® - - 20 mm* - - -
Foamboard - - 13 mm* - - -
MÁX. CUT
All materials 305 cm high 305 cm high 250 cm high 305 cm high 320 cm wide 320 cm wide 320 cm wide

*Optional accessory required. **Possible but not for daily use ♦ Score and snap.

WINCUT Pneumatic Cutter

The Wincut is a pneumatic vertical cutter designed to cut specifically semi-rigid materials and also glass up to 305 cm. The movement of the cutting head is done through a pneumatic cylinder that guarantees a fast and smooth cut. The unit is also equipped with a pneumatic clamping system to strongly hold the material that needs to be cut.

The Wincut comes standard equipped with two interchangeable cutting heads: one to cut semi-rigids materials up to 20 mm using a special knife and a second one to cut glass up to 3 mm using a cutting wheel.

The Wincut is available in three different cutting sizes: 160 cm (63”), 246 cm (96”) & 305 cm (120”).

Materials cut by the Wincut vertical cutter: foamboard, cardboard, honeycomb / Re-board®, corrugated plastic, PVC, mountboard, glass.

 

Cutting features

RIGIDS Interchangeable heads
PVC Foamboard 5 mm
Glass 6 mm ♦
   
SEMI-RIGIDS Interchangeable heads
Foamboard 20 mm
Cardboard 20 mm
Honeycomb / Re-board® 13 mm
Corrugated plastic 5 mm
Passepartout Yes
♦ Score and snap.

 

Materials

Foamboard, cardboard, honeycomb / Re-board®, corrugated plastic, PVC, mountboard, glass.

Why is it different?

INTERCHANGEABLE CUTTING HEAD SYSTEM

Interchangeable cutting head system that allows a quick change of the cutting head.

DIFFERENT CUTTING HEADS AVAILABLE

Two different cutting heads available to cut semi-rigid materials and glass.

EASY TO OPERATE

Pneumatic switch to quickly and easily activate the pneumatic knife.

PNEUMATIC CLAMPING SYSTEM

Useful system to hold the material and with the possibility of regulating the pressure if it’s required.

Other features
• Equipped with nylon rollers on the base to easily move and handle large materials.
• Two measurement stops to accurately set up the desired measure to get.
• Easy to set up and square through the adjusting screw system.
• Laser system available as an accessory, useful to indicate the cutting line.

 

Do you want to see how it works?

 

 

 

 

 

 

 

 

 

  1. Inglet
  2. Products
  3. Vertical Saw and Cutter
  4. WINCUT
  5. Presentation