Accessories

? Compare our cutter machines here! WHAT DO YOU NEED TO CUT?

WHAT DO YOU NEED TO CUT?

	Verdi BASIC	Verdi TWIN		Wincut	Inblade	Inblade PRO	Inbest BASIC	Inbest TWIN	Inbest PRO
Download table
CUTTING SYSTEM	SAW	SAW	BLADE	INTERCHAN. HEADS	INTERCHANGEABLE HEADS		INTERCHANGEABLE HEADS
RIGIDS
PVC Foamboard	20 mm	20 mm	5 mm	5 mm	13 mm		5 mm / 10 mm**		10 mm
Dibond®	12 mm	12 mm	-	-	4 mm		-	-	-
ChromaLuxe®	3 mm	3 mm	-	-	1 mm		-	-	-
Plexiglas®	12 mm	12 mm	-	-	*6 mm / ♦**	*6 mm / / ♦	*4 mm / ♦**	*4 mm / ♦**	*4 mm / ♦**
MDF / Wood	20 mm	20 mm	-	-	4 mm		-	-	-
Glass	-	-	*6 mm / ♦**	6 mm ♦	*6 mm / ♦**		-	-	-
SEMI-RIGIDS
Foamboard	-	-	20 mm	20 mm	13 mm / 20 mm*		13 mm / 20 mm*	13 mm / 20 mm*	13 mm / 20 mm*
Cardboard	-	-	20 mm	20 mm	13 mm / 20 mm*		13 mm / 20 mm*	13 mm / 20 mm*	13 mm / 20 mm*
Re-board®	-	20 mm		13 mm	13 mm / 20 mm*		13 mm / 20 mm*	13 mm / 20 mm*	13 mm / 20 mm*
Corrugated plastic	20 mm	20 mm	5 mm	5 mm	13 mm		13 mm	13 mm	13 mm
Passepartout	-	-	Yes	Yes	Yes		Yes	Yes	Yes
FLEXIBLES
Fabric / Textiles	-			-	-		Yes	Yes	Yes
Plastic film	-			-	-		Yes	Yes	Yes
Banner materials	-			-	-		Yes	Yes	Yes
Paper	-			-	-		Yes	Yes	Yes
Vinyl	-			-	-		Yes	Yes	Yes
Magnetic sheets	-			-	-		Yes	Yes	Yes
V-GROOVE
Dibond®	-			-	4 mm*		-	-	-
Re-board®	-			-	20 mm*		-	-	-
Foamboard	-			-	13 mm*		-	-	-
MÁX. CUT
All materials	305 cm high			305 cm high	250 cm high	305 cm high	320 cm wide	320 cm wide	320 cm wide
Optional accessory required. *Possible but not for daily use ♦ Score and snap.

Code 45 11 33 VERDI TWIN / WINCUT BLADE CUTTING HEAD -Included-

Cutting head with blade for Verdi Twin and Wincut pneumatic cutter. Included. Suitable for cutting semi-rigid materials such as foam board, cardboard or honeycomb / Re-board® up to 20 mm thick and also PVC up to 5 mm thick. The depth of the blade can be adjusted with this cutter head. Replaces the old head. Required for new blades, 13 01 30. The head is supplied with 5 replacement blades.

Code 45 17 80 CUTTING HEAD FOR GLASS VERDI TWIN / WINCUT -Included-

Cutting head with roller for the Verdi Twin 122 and 157 cm pneumatic cutter and for the Wincut in all cutting sizes. Used to cut glass up to 3 mm. Incorporates an accessory to facilitate the splitting of glass. Optional for Verdi Twin. Included for Wincut.

Code 14 20 06 LASER BEAM FOR CUTTING HEAD

This mini laser is mounted on the cutting heads of the Verdi Basic, Verdi Twin or Wincut cutters. It shows a thin red line on the material that serves as a guide for the cut.

Code 14 20 05 ARM EXTENSION WITH MILLIMETER SCALE FOR WINCUT -1 m-

1 metre extension that fits into the side of the Wincut to work with large sheets. This will make the work much easier. It can be mounted either on the right or left side of the machine.

Code 45 11 11 MEASURE TAB, RIGHT -Included-

Measuring stops are used to increase the accuracy and speed of repetitive cutting by simply adjusting the stop to the desired measurement. Included in: Verdi Basic, Verdi Twin and Wincut.

Code 45 11 75 MEASURE TAB, LEFT -Included-

Measuring stops are used to increase the accuracy and speed of repetitive cutting by simply adjusting the stop to the desired measurement. Included in: Verdi Basic, Verdi Twin and Wincut.

Code 02 09 40 SILENT COMPRESSOR, 1 Hp -24 l-

With sound levels from just 42 dB and almost no vibration when running. Necessary only if you do not have a compressed air system on your premises. Suitable for:
• Wincut.
• Inblade.
• Inblade Pro.
• Verdi Basic (only when purchasing the pneumatic presser).
• Verdi Twin.

Code 02 09 24 ABAC OS20P POLE POSITION COMPRESSOR, 2 Hp 220 V -24 l-

High performance with a quiet, oil-free pump. Easy to transport and position. Noise level as low as 59 dB(A). Necessary only if you do not have a compressed air system on your premises. Suitable for:
• Wincut.
• Inblade.
• Inblade Pro.
• Verdi Basic (only if you purchase the pneumatic foot).
• Verdi Twin.

Code 02 09 26 ABAC L20 POLE POSITION COMPRESSOR, 2 Hp 220 V -24 l-

Lubricated compressor with direct drive. Excellent technology and simple operation. Necessary only if you do not have a compressed air system on your premises. Suitable for:
• Wincut.
• Inblade.
• Inblade Pro.
• Verdi Basic (only if you purchase the pneumatic foot).
• Verdi Twin.

Blades

Code 13 01 30 TRAPEZOID BLADE -100 u-

Cutting blades with 2 slots for medium duty, 1% carbon steel.

Code 14 07 43 GLASS CUTTING WHEEL

Inglet

WHAT DO YOU NEED TO CUT?

WINCUT Pneumatic Cutter